Configuration Form; Configuration And Connection Information - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual
Hp storageworks fabric os 6.x administrator guide (5697-0015, may 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- Hardware reference manual (256 pages) ,
- User manual (248 pages)
Table of Contents
Advertisement
To download a configuration file from one switch to another same model switch:
Configure one switch first.
1.
2.
Use the configUpload command to save the configuration information. See
configuration" on page 135.
3.
Run configDefault on each of the target switches, and then use the configDownload command
to download the configuration file to each of the target switches. See
page 137.
Configuration form
Use
Table 44
as a hard copy reference for your configuration information.
In the hardware reference manuals for the 4/256 SAN Director and DC SAN Backbone Director (short
name, DC Director) there is a guide for FC port setting tables. The tables can be used to record
configuration information for the various blades.
Table 44
Configuration and connection information
Configuration settings
IP address
Gateway address
Chassis configuration option
Management connections
Serial cable tag
Ethernet cable tag
Configuration information
Domain ID
Switch name
Ethernet IP address
Ethernet subnet mask
Total number of local devices (nsShow)
Total number of devices in fabric (nsAllShow)
Total number of switches in the fabric (fabricShow)
"Backing up a
"Restoring a
configuration" on
Fabric OS 6.x administrator guide 141
Advertisement
Table of Contents
Troubleshooting
