HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 47

3. Enter the haShow to verify that HA is enabled, the heartbeat is up, and that the HA state is
synchronized between the active and standby CP blades.
4. Enter the slotShow to display the inventory and the current status of each slot in the system.
To verify fabric connectivity:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the fabricShow command. This command displays a summary of all the switches in the fabric.
switch:admin> fabricshow
Switch ID Worldwide Name
-------------------------------------------------------------------------
64: fffc40 10:00:00:60:69:00:06:56
65: fffc41 10:00:00:60:69:00:02:0b
66: fffc42 10:00:00:60:69:00:05:91
67: fffc43 10:00:00:60:69:10:60:1f
The Fabric has 4 switches
To verify device connectivity:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Optional: Enter the switchShow command to verify that devices, hosts, and storage are connected.
3. Optional: Enter the nsShow command to verify that devices, hosts, and storage have successfully
registered with the name server.
4. Enter the nsAllShow command to display the 24-bit Fibre Channel addresses of all devices in the
fabric.
switch:admin> nsallshow
{
010e00 012fe8 012fef 030500 030b04 030b08 030b17 030b18
030b1e 030b1f 040000 050000 050200 050700 050800 050de8
050def 051700 061c00 071a00 073c00 090d00 0a0200 0a07ca
0a07cb 0a07cc 0a07cd 0a07ce 0a07d1 0a07d2 0a07d3 0a07d4
0a07d5 0a07d6 0a07d9 0a07da 0a07dc 0a07e0 0a07e1 0a0f01
0a0f02 0a0f0f 0a0f10 0a0f1b 0a0f1d 0b2700 0b2e00 0b2fe8
0b2fef 0f0000 0f0226 0f0233 0f02e4 0f02e8 0f02ef 210e00
211700 211fe8 211fef 2c0000 2c0300 611000 6114e8 6114ef
611600 620800 621026 621036 6210e4 6210e8 6210ef 621400
621500 621700 621a00
75 Nx_Ports in the Fabric }
switch:admin>
The number of devices listed should reflect the number of devices that are connected.
To show switches in Access Gateway mode:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the agShow command.
switch:admin> agshow
Worldwide Name
--------------------------------------------------------------
10:00:00:05:1e:02:1d:b0
10:00:00:05:1e:03:4b:e7
10:00:00:05:1e:35:a2:58
This command displays all the switches in Access Gateway mode in the fabric.
Enet IP Addr
192.168.64.59
192.168.64.180
192.168.64.60
192.168.64.187
Ports Enet IP Addr
16 10.32.53.4 v5.2.1
24 10.32.60.95 v5.2.1
20 10.32.53.180 v5.2.1
FC IP Addr
192.168.65.59
192.168.65.180 >"sw180"
192.168.65.60
0.0.0.0
Firmware Local/Remote Name
local ag_01
local ag_02
remote ag_03
Fabric OS 6.x administrator guide
Name
"sw5"
"sw60"
"sw187"
47