Removing The Lower Bezel - IBM 436854u - System x3200 M2 5U Mini Tower Server Problem Determination And Service Manual

Removing the lower bezel

When you work with some devices, such as the drives in bays 4 through 7 (or bays
4 through 11 for some 2.5 inch hard disk drive models), you must first remove the
lower bezel to access the devices.
To remove the lower bezel, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If you are replacing a non-hot-swap component, turn off the server and all
3. Unlock the side cover.
4. Press the round blue release button on the right side of the lower bezel and
5. If you are instructed to return the lower bezel, follow all packaging instructions,
54
System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
on page 47.
attached devices; then, disconnect all power cords and external cables.
Note: You do not have to remove the side cover to remove the lower bezel.
rotate the lower bezel downward to disengage and remove it from the chassis.
and use any packaging materials for shipping that are supplied to you.