Installing The Side Cover - IBM 436854u - System x3200 M2 5U Mini Tower Server Problem Determination And Service Manual

Installing the side cover

Attention:
on the server. Operating the server for extended periods of time (more than 30
minutes) with the side cover removed might damage server components.
To install the side cover, complete the following steps:
1. Make sure that all cables, adapters, and other components are installed and
2. If you removed the upper and lower bezels, reinstall them before you replace
3. Position the lip on the bottom edge of the side cover on the ledge on the bottom
4. Lock the side cover.
5. Reconnect the external cables and power cords; then, turn on the attached
For proper cooling and airflow, replace the side cover before you turn
seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
the side cover (see "Installing the upper bezel" on page 57 and "Installing the
lower bezel" on page 55).
Important: The cover lock must be in the unlocked (opened) position before
you install the side cover.
of the chassis; then, rotate the cover up to the chassis. Press down on the
cover release latch and push the cover completely closed until it latches
securely into place.
devices and turn on the server.
Chapter 4. Removing and replacing server components
53