Installing The Optional Mini-Pci-X Enablement Card - IBM 436854u - System x3200 M2 5U Mini Tower Server Problem Determination And Service Manual

6. Disconnect the mini-PCI-X enablement card from the mini-PCI-X enablement
7. If you are instructed to return the mini-PCI-X enablement card, follow all

Installing the optional mini-PCI-X enablement card

To install the optional mini-PCI-X enablement card, complete the following steps:
1. Touch the static-protective package that contains the mini-PCI-X enablement
2. Position the mini-PCI-X enablement card over the mini-PCI slot connector and
98
System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
Mini-PCI slot
Mini-PCI-X enablement
card
Mini-PCI-X enablement
card connector
card connector; then, grasp the edges of the mini-PCI-X enablement card and
pull it out of the mini-PCI slot. If the standoff comes away from the system
board with the card, gently pull it out of the card and push it back into the hole
on the system board.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
card to any unpainted surface on the outside of the server; then, remove
mini-PCI-X enablement card from the package.
the plastic standoff. Press the mini-PCI-X enablement card firmly into the
mini-PCI slot connector and into the mini-PCI-X enablement card connector, and
then onto the plastic standoff.