Upload - NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual
Smart switch
Hide thumbs
Also See for GS724AT - ProSafe Gigabit Smart Switch:
- Hardware installation manual (38 pages) ,
- Datasheet (4 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
2. Check the confirmation box.
3. Click Apply to reset the device to the factory defaults.
Upload
The Upload menu contains the following option:
•
"Upload"
Upload
System Files can be backed up using the Upload screen.
To back up files:
1. Click Maintenance > Upload. The Upload screen displays:
Figure 8-3
The Upload screen contains the following fields:
•
File Type – Enter the type of file to be uploaded. The possible field values are:
–
Firmware – Upload the Firmware File.
–
Configuration – Upload the Configuration File.
•
via TFTP – Select to upload the Firmware or Configuration File to the TFTP Server.
•
via HTTP – Select to upload the Configuration File via the web browser interface
(HTTP).
•
TFTP Server IP – Enter the TFTP Server IP Address to which the Firmware or
Configuration file is uploaded.
Maintenance
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
8-3
Advertisement
Table of Contents
