NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 140

• Egress Shaping Rates CIR – Enter the Egress Shaping Committed Information Rate
(CIR) in kilobits per second. The possible field range is 64 to 1000000 for GE ports.
• Egress Shaping Rates CbS – Enter the Egress Shaping Committed Burst Size (CbS) in
bits per second. The possible field range is 4096 to 16769020.
2. Select the interface.
3. Choose either Enable or Disable in the Ingress Rate Limit Status provided field in the first
row.
4. If you selected Enable in the Ingress Rate Limit Status field, enter the Ingress Rate Limit in
the provided field in the first row.
5. Choose either Enable or Disable in the Egress Shaping Rate Status provided field in the first
row.
6. If you selected Enable in the Egress Shaping Rate Status field, enter the Egress Shaping
Rates CIR and CbS in the provided fields in the first row.
7. Click APPLY to update the device.
Advanced
The CoS Advanced menu contains the following options:
• "CoS to Queue Mapping"
• "DSCP to Queue Mapping"
CoS to Queue Mapping
The CoS to Queue Mapping screen contains fields for mapping CoS values to traffic queues.
Configuring QoS
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
5-7