Stp - NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual

GS700AT Series Smart Switch Software Administration Manual
– 00-03-6B – Assigned to Cisco IP Phones.
– 00-0F-E2 – Assigned to H3C IP Phones.
– 00-60-B9 – Assigned to NEC/Philips IP Phones.
– 00-D0-1E – Assigned to Pingtel IP Phones.
– 00-E0-75 – Assigned to Polycom/Veritel IP Phones.
– 00-E0-BB – Assigned to 3COM IP Phones.
• Description – Enter an OUI description up to 32 characters.
2. Select the OUI entry.
3. Enter the Telephony OUI(s) and Description in the provided fields in the first row.
4. Click Apply to update the device.
To add a new Voice VLAN OUI:
1. Click Switching > Voice VLAN > Advanced > OUI. The Voice VLAN OUI screen displays.
2. Enter the Telephony OUI(s) and Description in the provided fields in the first row.
3. Click Add to update the device.
To remove a Voice VLAN OUI:
1. Click Switching > Voice VLAN > Advanced > OUI. The Voice VLAN OUI screen displays.
2. Select the OUI entry.
3. Click Delete to remove the entry.
To restore Voice VLAN OUI factory defaults:
1. Click Switching > Voice VLAN > Advanced > OUI. The Voice VLAN OUI screen displays.
2. Click Restore Defaults to restore the factory defaults.

STP

Spanning Tree Protocol (STP) provides network topology for any arrangement of bridges. STP
also provides a single path between end stations on a network, eliminating loops. Loops occur
when alternate routes exist between hosts. Loops in an extended network can cause bridges to
forward traffic indefinitely, resulting in increased traffic and reducing network efficiency.
4-28
v1.0, March 2008
Configuring Switching Settings