NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 150

• Single Connection – Select whether a single open connection between the host
Authentication Port and the TACACS+ server is enabled or disabled. The possible field
values are:
– Enable – Enable a single connection.
– Disable – Disable a single connection.
• Active – Select whether this server is the primary or backup TACACS+ server used for
authentication. The possible values are:
– Primary – Define the TACACS+ Primary Server.
– Backup – Define the TACACS+ Backup Server.
2. Select the TACACS+ server entry.
3. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
4. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
5. Click Apply to update the device.
To add a new TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the
provided fields in the first row.
3. Select the Single Connection status and Active server from the lists in the provided fields in
the first row.
4. Click Add to update the device.
To remove a TACACS+ server entry:
1. Click Security > Management Security > TACACS+. The TACACS+ screen displays.
2. Select the TACACS+ server entry.
3. Click Delete to remove the entry.
Managing Security
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
6-7