NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 93

GS700AT Series Smart Switch Software Administration Manual
6. Click CURRENT MEMBERS. The Current Members window opens and displays the
member ports included in the LAG:
Figure 4-7
LACP Configuration
Aggregated links can be set up manually or automatically established by enabling LACP on the
relevant links. Aggregated ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP Configuration screen contains fields for
configuring LACP.
To configure LACP:
1. Click Switching > LAG > Advanced > LACP Configuration. The LACP Configuration
screen displays:
Figure 4-8
4-12
v1.0, March 2008
Configuring Switching Settings