NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 71

GS700AT Series Smart Switch Software Administration Manual
LLDP-MED Port Settings
The LLDP-MED Port Settings screen contains parameters for assigning LLDP-MED network
policies to specific ports.
To configure LLDP-MED port settings:
1. Click System > LLDP > Advanced > LLDP-MED Port Settings. The LLDP-MED Port
Settings screen displays:
Figure 3-22
The LLDP-MED Port Settings screen contains the following fields:
• Port – Select the port to configure.
• LLDP-MED Status – Select the LLDP-MED status for the selected port. The possible
field values are:
– Enable – Enable LLDP-MED on the selected port.
– Disable – Disable LLDP-MED on the selected port.
• Notification – Select the notification status for the selected port. The possible field values
are:
– Enable – Enable notification on the selected port.
– Disable – Disable notification on the selected port.
• Network Policies – Click on the gold button to select the network policy numbers to apply
to the selected port.
2. Select the Port from the list in the provided field.
3. Select the LLDP-MED Status of the selected port from the list in the provided field.
3-36
v1.0, March 2008
Managing System Settings