NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 184

• Received Bytes – Displays the number of octets received on the interface since the device
was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
• Broadcast Packets Received – Displays the number of good broadcast packets received
on the interface since the device was last refreshed. This number does not include
Multicast packets.
• Multicast Packets Received – Displays the number of good Multicast packets received
on the interface since the device was last refreshed.
• CRC & Align Errors – Displays the number of CRC and Align errors that have occurred
on the interface since the device was last refreshed.
• Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
• Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
• Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
• Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
• Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
• Frames of 64 Bytes – Displays the number of 64-byte frames received on the interface
since the device was last refreshed.
• Frames of 65 to 127 Bytes – Displays the number of 65 to 127 byte frames received on
the interface since the device was last refreshed.
• Frames of 128 to 255 Bytes – Displays the number of 128 to 255 byte frames received on
the interface since the device was last refreshed.
• Frames of 256 to 511 Bytes – Displays the number of 256 to 511 byte frames received on
the interface since the device was last refreshed.
• Frames of 512 to 1023 Bytes – Displays the number of 512 to 1023 byte frames received
on the interface since the device was last refreshed.
Monitoring the Switch
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
7-13