GS700AT Series Smart Switch Software Administration Manual
To configure Storm Control:
1. Click Security > Traffic Control > Storm Control. The Storm Control screen displays:
Figure 6-9
The Storm Control screen contains the following fields:
•
Interface – Displays the port number for which the storm control information is
displayed.
•
Broadcast Control – Select whether storm control is enabled or disabled on the interface
according to Broadcast mode. The possible field values are:
–
Enable – Enable storm control on the interface.
–
Disable – Disable storm control on the interface.
•
Broadcast Mode – Select the Broadcast control mode on the interface. The possible field
values are:
–
Multicast & Broadcast & Unknown Unicast – Count Broadcast, Multicast and Unicast
traffic together.
–
Multicast & Broadcast – Count Broadcast and Multicast traffic together.
–
Broadcast Only – Count Broadcast traffic only. This mode is enabled by default.
6-16
v1.0, March 2008
Managing Security