NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 168

5. Click Apply to update the device.
To remove an IP-based ACL entry:
1. Click Security > ACL > IP ACL. The IP ACL screen displays.
2. Select the ACL entry.
3. Click Delete to remove the entry.
IP Rules
The IP Rules screen allows an IP Rule to be defined within a configured ACL. Rules can be added
only if the ACL is not bound to an interface.
o define IP Rules:
T
1. Click Security > ACL > IP Rules. The IP Rules screen displays:
Figure 6-15
The IP Rules screen contains the following fields:
IP ACL
• ACL Name – Select the ACL Name from the list.
IP Rules
• Priority – Enter the rule priority. When the packet is matched to a rule, user groups are
either granted permission or denied device management access. The rule number is
essential to matching packets to rules, as packets are matched on a first-fit basis.
• Protocol ID – Enter the protocol in the rule to which the packet is matched.
• Source IP Address – Enter the source IP Address.
Managing Security
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
6-25