Advanced
The STP Advanced menu contains the following options:
•
"STP Configuration"
•
"CST Configuration"
•
"CST Port Configuration"
•
"Rapid STP"
STP Configuration
The Advanced STP Configuration screen contains parameters for enabling STP on the device.
To configure STP on the device:
1. Click Switching > STP > Advanced > STP Configuration. The Advanced STP
Configuration screen displays:
Figure 4-21
The Advanced STP Configuration screen contains the following fields:
Global Settings
•
Spanning Tree State – Select the STP state on the device. The possible field values are:
–
Enable – Enable STP on the device.
–
Disable – Disable STP on the device.
•
STP Operation Mode – Select the STP mode on the device. The possible field values are:
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-31