Mac Binding Configuration - NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual

4. Click Delete to remove the entry.

MAC Binding Configuration

To bind interfaces to an ACL:
1. Click Security > ACL > MAC Binding Configuration. The MAC Binding Configuration
screen displays:
Figure 6-13
The MAC Binding Configuration screen contains the following fields:
MAC Binding Configuration
• ACL Name – Select the ACL Name for viewing and modifying ACL bound interfaces.
Port Selection Table
2. Select the interfaces to which the ACLs are bound.
3. Select the ACL Name from the list in the provided field.
4. Select the interfaces to bind to the selected ACL Name by one of the following methods.
a. Click on the port's or LAG's gold bar to display the associated interfaces, and then select
the interfaces to bind by clicking on the boxes below the interfaces.
or
b. Click on the port's or LAG's quick box to select all the associated interfaces.
5. Click Apply to update the device.
Managing Security
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
6-23