NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 110

The STP menu contains the following options:
• "Basic"
• "Advanced"
Basic
The STP Basic menu contains the following options:
• "STP Configuration"
STP Configuration
The Basic STP Configuration screen contains parameters for configuring STP on the device.
To configure STP on the device:
1. Click Switching > STP > Basic > STP Configuration. The Basic STP Configuration screen
displays:
Figure 4-20
The Basic STP Configuration screen contains the following fields:
Global Settings
• Spanning Tree State – Select the STP state on the device. The possible field values are:
– Enable – Enable STP on the device.
– Disable – Disable STP on the device.
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-29