NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 94

The LACP Configuration screen contains the following field:
• LACP System Priority – Enter the system priority value. The field range is 1-65535. The
field default is 1.
2. Enter the LACP System Priority in the provided field.
3. Click Apply to update the device.
LACP Port Configuration
To configure LACP port priority:
1. Click Switching > LAG > Advanced > LACP Port Configuration. The LACP Port
Configuration screen displays:
Figure 4-9
The LACP Port Configuration screen contains the following fields:
• Interface – Displays the interface number to which timeout and priority values are
assigned.
• LACP Priority – Enter the port priority value. The field range is 1-65535.
• Timeout – Select the administrative LACP timeout. The possible field values are:
– Long – A long timeout value (90 seconds). This is the default.
Configuring Switching Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
4-13