NETGEAR GS724AT - ProSafe Gigabit Smart Switch Software Administration Manual page 52

To remove an SNMPv3 community:
1. Click System > SNMP > SNMPv3 > Community Configuration. The SNMPv3 Community
Configuration screen displays.
2. Select the community entry.
3. Click Delete to remove the entry.
Group Configuration
The SNMPv3 Groups screen provides information for creating SNMP groups and assigning
SNMP access control privileges to SNMP groups. Groups allow network managers to assign
access rights to specific device features or feature aspects.
To define an SNMP group:
1. Click System > SNMP > SNMPv3 > Group Configuration. The SNMPv3 Groups screen
displays:
Figure 3-12
The SNMPv3 Groups screen contains the following fields:
• Group Name – Enter the user-defined group to which access control rules are applied.
The field range is up to 30 characters.
• Security Model – Select the SNMP version associated with the group. The possible field
values are:
– SNMPv1 – SNMPv1 is defined for the group.
– SNMPv2 – SNMPv2c is defined for the group.
– SNMPv3 – SNMPv3 is defined for the group.
Managing System Settings
GS700AT Series Smart Switch Software Administration Manual
v1.0, March 2008
3-17