Removing Components From The Chassis; Installing The Replacement Chassis - Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual

DANGER
Turn off the power switches and disconnect the power cords (D006)
2. Power off the chassis by flipping all AC power switches to "0". (Power supply Status LED should
3. Remove the power cords from the power supplies and the power outlets.
4. Label the cables connected to all blades and record the connections in
5. Remove the chassis door
6. Disconnect the cables from the port blades and set them aside. The SFP or XFP transceivers
7.
8. Disconnect any ICL cables.

Removing components from the chassis

ATTENTION
Follow ESD precautions
1. Remove the cable management fingers
2. Remove the port, application, and encryption blades or filler panels
3. Remove the core switch blades (CR4S-8)
4. Remove the control processor blades (CP8)
5. Remove the power supplies or filler panels
6. Remove the blower assemblies
7.

Installing the replacement chassis

CAUTION
Use safe lifting practices when moving the product. (C015)
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
Stopping blade 8
Shutting down the blade....
Broadcast message from root (pts/1) Tue Jul 18 14:23:06 2008...
The system is going down for system halt NOW !!
turn off.)
can be left in the port blades or removed.
Disconnect all cables from the CP8 and CR4S-8 blades.
("ESD
and encryption blades" and
Remove the WWN bezel (logo plate) and WWN cards
RRP: PowerConnect B-DCX-4S chassis
("RRP: Chassis door").
precautions").
("RRP: Vertical cable management
"RRP: Blade filler panel").
("RRP: Core switch blade
("RRP: Control processor blade
("RRP: Power
("RRP: Blower assembly").
Table 14.
fingers").
("RRP: Port, application,
(CR4S-8)").
(CP8)").
supply").
("RRP: WWN card").
5
77