Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual page 48

4
Determining the status of a port, application, or encryption blade
Table 4
actions for those patterns.
TABLE 4
LED purpose
Power LED
Status LED
34
describes the port, application, and encryption blade LED patterns and the recommended
Port, application, and encryption blade LED descriptions
Color
Steady green
No light (LED is off)
No light (LED is off)
Steady amber
Slow-flashing amber (on 2
seconds, then off 2
seconds)
Fast-flashing amber (on
1/2 second, then off 1/2
second)
Status
Blade is enabled.
Blade is not powered on.
Blade is either healthy or does
not have power.
Blade is faulty.
Blade is not seated correctly or
is faulty.
Environmental range exceeded.
PowerConnect B-DCX4S Backbone Hardware Reference Manual
Recommended action
No action required.
Ensure that the blade is firmly
seated and either the
thumbscrew is fully engaged or
the slider is pushed up and the
ejectors are fully engaged..
Verify that the power LED is on.
Ensure that the blade is firmly
seated and check the status by
entering the slotShow
command. If LED remains
amber, consult the
PowerConnect B-DCX-4S
supplier.
Pull the blade out and reseat it.
If LED continues to flash,
replace the blade.
Check for out-of-bounds
environmental condition and
correct it.
53-1001808-01