Bsmi Statement (Taiwan); Ce Statement; Canadian Requirements; Laser Compliance - Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual

A
Regulatory compliance

BSMI statement (Taiwan)

The BSMI Statement is applicable to the power supplies.

CE statement

This is a Class A product. In a domestic environment, this product might cause radio interference,
and the user might be required to take corrective measures.
The standards compliance label on the product contains the CE mark which indicates that this
system conforms to the provisions of the following European Council directives, laws, and
standards:
•
•
•
•
•
•

Canadian requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations, ICES-003 Class A.

Laser compliance

This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.
Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and
comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I,
and with IEC 825-2. Optical products that do not comply with these standards might emit light that
is hazardous to the eyes.
96
Electromagnetic Compatibility (EMC) Directive 2004/108EEC
Low Voltage Directive (LVD) 73/23/EEC and the Complementary Directive 93/68/EEC
EN55022:2006 (European Emissions Requirements)
EN55024:1998, +A1:2001 and +A2:2003 (European Immunity Requirements)
EN61000-3-2:2006/JEIDA (European and Japanese Harmonics Spec)
EN61000-3-3:1995, +A1:2001 and +A2:2005
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01