Time And Items Required; Removing A Blower Assembly - Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual

Time and items required

The replacement procedure for each blower assembly takes less than 5 minutes. The following
items are required for the blower assembly replacement:
•
•

Removing a blower assembly

1. Before removing a blower assembly, verify that the other blower assembly is functioning
2. Use the screwdriver to loosen the captive screws at the left and right of the blower assembly
3. Grasp the handle and pull, sliding the blower assembly from the chassis and supporting the
FIGURE 27
'
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
Replacement blower assembly
Phillips #2 screwdriver
correctly. The power LEDs should be steady green.
(Figure 27).
blower assembly from beneath as you remove it.
RRP: Blower assembly
RRP: Blower assembly
5
61