5
RRP: Vertical cable management fingers
Time and items required
The replacement procedure for the chassis door takes less than five minutes.
Removing a chassis door
Support the door to prevent it from falling. Pull and remove the door.
FIGURE 19
Replacing a chassis door
1. Align the holes in the door with the pins in the chassis.
2. Push the door into place.
RRP: Vertical cable management fingers
The PowerConnect B-DCX-4S comes equipped with two vertical cable management finger
assemblies. It can continue to operate during the replacement of the cable management fingers.
Due to the horizontal orientation of the blades in the DCX-4S, the finger assemblies are attached to
the uprights of the mounting rack.
44
RRP: Chassis door
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01