Downloading The Configuration; Verifying Correct Operation Of System - Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual

8. Replace the cable management fingers
9. Connect the power cords to the power supplies and the power outlets.
10. Replace the chassis door
11. Power-on the PowerConnect B-DCX-4S
12. Verify that the PowerConnect B-DCX-4S is powered on and POST is complete (all power LED
13. Verify that all components are functioning correctly by checking their LEDs. If the LEDs do not

Downloading the configuration

Once the chassis and its various components have been reassembled and powered back on, use
the configDownload command to restore the original configuration. The configDownload command
can be entered through a Telnet or serial session, but the PowerConnect B-DCX-4S must have an
Ethernet connection to the server name or IP of the host for the download process to complete. For
more information, refer to the help configdownload command or the Fabric OS Command
Reference.
1. Log in to the PowerConnect B-DCX-4S as admin:
2. Enter configDownload command.
3. Reboot the DCX-4S.

Verifying correct operation of system

1. Log in to the PowerConnect B-DCX-4S as admin:
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
The PowerConnect B-DCX-4S performs a power-on self-test (POST). The POST takes a minimum
of three minutes and is complete when LED activity returns to standard state.
indicators on the port, control processor, and core switch blades should be a steady green).
indicate correct operation, try reinstalling the corresponding component.
switch:admin> login
login: admin
password: xxxxxxxx
switch:admin>
NOTE
If you are using the virtual fabric feature, you should run configdownload -vf before running the
configdownload command in order to restore the logical switch configuration.
switch:admin> configdownload -all
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch.txt
Password: xxxxxxxx
download complete
switch:admin>
switch:admin> login
login: admin
password: xxxxxxxx
switch:admin>
RRP: PowerConnect B-DCX-4S chassis
("RRP: Vertical cable management
("RRP: Chassis door").
("Powering on the PowerConnect
5
fingers").
B-DCX-4S").
79