Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual page 124

C
Troubleshooting
TABLE 26
Troubleshooting the PowerConnect B-DCX-4S (Continued)
Issue
An individual component is not
operating as expected.
110
Possible cause
Component may not have power or may not
be firmly seated.
Pins on the component or the backplane
might be damaged.
The component might have failed.
Recommended action
Ensure that the component is receiving power
(power LED should be on) and the component is
firmly seated.
Remove the component from the chassis and
inspect the pins on the blade and inside the chassis.
Do not reinstall if the pins on either component are
damaged, as this could damage pins on other
components. Replace parts as required.
Enter the tempshow and sensorShow commands to
determine the component status. If the component
is a CP blade or port blade, enter the slotShow
command to determine the status. Replace the
component as necessary
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01