Removal and Replacement Procedures (RRPs)
In this chapter
Introduction
NOTE
Read the safety notices before servicing
The field replaceable units (FRUs) in the PowerConnect B-DCX-4S can be removed and replaced
without special tools. The PowerConnect B-DCX-4S can continue operating during many of the FRU
replacements if the conditions specified in the procedure are followed.
The following sections contain FRU removal and replacement procedures (RRPs).
RRP: Chassis door
NOTE
The chassis door must be installed to ensure the PowerConnect B-DCX-4S meets EMI and other
regulatory certifications. Additionally, if ICL cables are not used, EMI plugs must be inserted in the
ICL cable ports to meet certification standards.
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
53-1001808-01
•
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
•
RRP: Chassis door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
•
•
•
•
•
•
RRP: Power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
•
RRP: Blower assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
•
RRP: WWN card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
•
RRP: SFPs and XFPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
•
•
("Safety
notices").
Chapter
5
43