D-Link DGS-3120-24TC Product Manual page 222

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
associated with the MAC-based access control function of the Switch, and configure ports to be enabled or
disabled for the MAC-based access control feature of the Switch. Please remember, ports enabled for certain other
features, listed previously, and cannot be enabled for MAC-based access control.
To view this window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control
Settings as shown below:
The fields that can be configured are described below:
Parameter
MAC-based Access
Control State
Method
Password
RADIUS
Authorization
Local Authorization
Figure 8–25 MAC-based Access Control Settings window
Description
Toggle to globally enable or disable the MAC-based access control function on the
Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured
in the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control. Remember, the MAC list must be previously set on the
RADIUS server.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
214