xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
WAC Authentication State
Users can view and delete the hosts for Web authentication.
To view this window, click Security > Web-based Access Control (WAC) > WAC Authentication State as
shown below:
The fields that can be configured are described below:
Parameter
Port List
Authenticated
Authenticating
Blocked
Click the Find button to locate a specific entry based on the information entered.
Click the Clear by Port button to remove entry based on the port list entered.
Click the View All Hosts button to display all the existing entries.
Click the Clear All Hosts button to remove all the entries listed.
Compound Authentication
Compound Authentication settings allows for multiple authentication to be supported on the Switch.
Compound Authentication Settings
Users can configure Authorization Network State Settings and compound authentication methods for a port or ports
on the Switch.
To view this window, click Security > Compound Authentication > Compound Authentication Settings as
shown below:
Figure 8–33 WAC Authentication State window
Description
Enter the desired range of ports and tick the appropriate check box(s), Authenticated,
Authenticating, and Blocked.
Tick this check box to clear all authenticated users for a port.
Tick this check box to clear all authenticating users for a port.
Tick this check box to clear all blocked users for a port.
222