D-Link DGS-3120-24TC Product Manual page 197

xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
Click the Add Rule button to create a new ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following page will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-128)
DSCP
Action
Figure 7–55 Egress Access Rule List window (IPv4 ACL)
Figure 7–56 Add Egress Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to
128.
Auto Assign – Ticking this check box will instruct the Switch to automatically assign
an Access ID for the rule being created.
Specify the value of DSCP. The DSCP value ranges from 0 to 63.
Select Permit to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
189