Configuring Call Home Attributes; Configuring Call Home Destination Attributes; Configuring Call Home E-Mail Addresses - Cisco DS-C9216I-K9 Configuration Manual

Configuring Call Home Attributes

Identify your SMTP server using the E-mail Setup tab
Step 3
section on page
message server will forward the Call Home notifications to the destinations.
Test Call Home by sending a test message using the Alerts tab (see the
Step 4
section on page
Configuring Call Home Attributes
To assign contact information and enable the Call Home feature from the Fabric Manager, choose Events
> Call Home on the menu tree and click the General tab. The Information pane from the Fabric Manager
displays Call Home information for multiple switches.
To assign contact information and enable the Call Home feature from the Device Manager, choose Call
Home from the Events menu and click the General tab. The Call Home Events dialog box with the
General tab selected from the Device Manager displays Call Home attributes for a single switch.

Configuring Call Home Destination Attributes

To configure the destination e-mail addresses for Call Home notifications from the Fabric Manager,
choose Events > Call Home on the menu tree and click the Destination tab. The Information pane from
the Fabric Manager displays Call Home information for multiple switches.
To configure the destination e-mail addresses from the Device Manager, choose Call Home from the
Events menu and click the Destination tab. The dialog box from the Device Manager displays Call Home
attributes for a single switch.
To create a new Call Home destination, follow these steps:
Click Create in the Device Manager dialog box, or click Create Row on the Fabric Manager toolbar.
Step 1
You see the Device Manager Create Call Home Destination dialog box.
From the Fabric Manager, you can choose one or more switches to which the configuration applies.
Choose the profile name from the pull-down list.
Step 2
Enter a number identifier for the destination.
Step 3
Enter the e-mail address for the destination.
Step 4
Click Create.
Step 5

Configuring Call Home E-Mail Addresses

To identify your SMTP server from the Fabric Manager, choose Events > Call Home on the menu tree
and click the Email Setup tab. The Information pane from the Fabric Manager displays Call Home
information for multiple switches.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
25-12
25-12). You need to identify a message server to which your switch has access. This
25-13). You should test the Call Home feature to make sure it works.
Chapter 25
("Configuring Call Home E-Mail Addresses"
"Configuring Call Home Alerts"
Configuring Call Home
OL-7753-01