Table of Contents
Advertisement
Zone Sets
Deactivating Zone Sets
To activate a zone set, follow these steps:
Step 1
Right-click the zone set in the Edit Full Database on Switch dialog box.
Step 2
Click Deactivate. The zone set is removed from the Active Zone Set folder.
Importing Active Zone Sets
You can import active zone sets (do a Merge Fail Recovery) if the cause of an ISL failure is a zone merge
fail. To import an active zone set, follow these steps:
From the Fabric Manager, choose Zone > Merge Fail Recovery. You see the Zone Merge Failure
Step 1
Recovery dialog box.
Click the Import Active Zoneset radio button.
Step 2
Step 3
Choose the switch from which to import the zone set information from the drop-down list.
Step 4
Choose the VSAN from which to import the zone set information from the drop-down list.
Choose the interface to use for the import process.
Step 5
Click OK to import the active zone set, or click Close to close the dialog without importing the active
Step 6
zone set.
Exporting Active Zone Sets
You can export active zone sets (do a Merge Fail Recovery) if the cause of an ISL failure is a zone merge
fail. To export an active zone set, follow these steps:
Step 1
From the Fabric Manager, choose Zone > Merge Fail Recovery. You see the Zone Merge Failure
Recovery dialog box.
Step 2
Click the Export Active Zoneset radio button.
Step 3
Choose the switch to which to export the zone set information from the drop-down list.
Step 4
Choose the VSAN to which to export the Zoneset information from the drop-down list.
Choose the interface to use for the export process.
Step 5
Click OK to export the active zone set, or click Close to close the dialog without exporting the active
Step 6
zone set.
Deleting Zone Sets or Members
To delete zone sets or members, follow these steps.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
15-12
Chapter 15
Configuring and Managing Zones
OL-7753-01
Advertisement
Chapters
Table of Contents
Troubleshooting
