Displaying Activated Port Bindings; Configuring Auto-Learning - Cisco DS-C9216I-K9 Configuration Manual

About Auto-Learn
Choose the port binding option that you want to apply to the switch from the drop-down menu. Choose
Step 4
from the following options:
•
•
•
•
•
•

Displaying Activated Port Bindings

To display port security active port bindings, perform the following steps.
From the Fabric Manager, choose Port Security from one of the VSANs on the menu tree.
Step 1
The Information pane of the Fabric Manager displays port security information for that VSAN.
Click the Active tab.
Step 2
You see a list of the port security active port bindings for that VSAN.

Configuring Auto-Learning

The state of the auto-learning configuration depends on the state of the port security feature:
•
•
If the auto-learn option is enabled on a VSAN, you cannot activate the database for that VSAN without
the force option.
Table 20-1
Table 20-1
Device (pWWN, nWWN,
sWWN)
Configured with one or
more switch ports
A switch on other ports Denied
Not configured
Denied if auto-learn
disabled
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
20-4
Activate—Valid port bindings are activated.
Activate (TurnLearningOff)—Valid port bindings are activated and the auto-learn option is turned
off.
ForceActivate—Activation is forced.
ForceActivate (TurnLearningOff)—Activation is forced and the auto-learn option is turned off.
Deactivate—Deactivates all currently active port bindings.
NoSelection—No action is taken
If the port security feature is not activated, the auto-learn option is disabled by default.
If the port security feature is activated, the auto-learn option is enabled by default.
summarizes the authorized connection for device requests.
Auto-learn Device Authorization
Requests Connection to Authorization
A switch on configured
ports
Aport that is not
configured
4
Chapter 20
Condition
Permitted 1
2
Permitted if auto-learn 3
option enabled
Configuring Port Security
OL-7753-01