Configuring Message Levels; Configuring E-Mail Options; Enabling Or Disabling Call Home; Default Settings - Cisco DS-C9216I-K9 Configuration Manual

Configuring Message Levels

Configuring Message Levels
The message-level option allows you to filter messages based on their level of urgency. Each destination
profile (predefined and user-defined) is associated with a Call Home message level threshold. Any
message with a value lower that the urgency threshold will not be sent. The urgency level ranges from 0
(lowest level of urgency) to 9 (highest level of urgency), and the default is 0 (all messages will be sent).

Configuring E-Mail Options

You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address
configurations are optional, you must ensure to configure the SMTP server address and port number for
the Call Home functionality to work.

Enabling or Disabling Call Home

Once you have configured the contact information, you must enable the Call Home function.

Default Settings

Table 25-1
Table 25-1
Parameters
Destination message size for a message sent in full
text format.
Destination message size for a message sent in
XML format.
Destination message size for a message sent in
short text format.
DNS or IP address of the SMTP server to reach the
server if no port is specified.

Event Triggers

This section discusses Call Home trigger events. Trigger events are divided into categories, with each
category assigned commands to execute when the event occurs. The command output is included in the
transmitted message.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
25-4
lists the default Call Home default settings.
Default Call Home Settings
Table 25-2 lists the trigger events. lists event categories and command outputs.
Chapter 25
Default
500,000
500,000
4,000
25
Configuring Call Home
OL-7753-01