New and Changed Information
The table below summarizes the new and changed features for the Cisco MDS 9000 Family Fabric
Manager Switch Configuration Guide, and tells you where they are documented. If a feature has changed
in Release 1.3, a brief description of the change appears in the "Description" column, and that release is
shown in the "Changed in Release" column.
Table 1
Feature
All
Fabric Manager Switch
Tree Change: QoS
Fabric Manager Switch
Tree Change: Interfaces
Fabric Manager Switch
Tree Change: IPFC
OL-7753-01
Documented Features for the Cisco MDS 9000 Family Fabric Manager Switch
Configuration Guide
Description
Updated procedures to remove CLI
command references.
Switch->QoS has been moved to
Switch->FC->QoS. QoS can only
apply to Fibre Channel.
Switch->Interfaces is a new folder
which contains:
•
Port Channels, moved from
Switch FC
•
FC Physical, moved from
Switch->FC
•
FC Logical, moved from
Switch->FC
•
SVC, moved from
Switch->FC
•
Ethernet, gigE and Ether
Channels, was previously
Switch->IP->Physical
Interfaces
Management, mgmt0 and vsan
•
with the ability to create ipfc.
Switch->IP->IPFC functionality is
now in
Switch->Interfaces->Management
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Where
Changed in Release
Documented
1.3(4)
1.3(4)
1.3(4)
xxxvii