Sub-Assembly A; Paper Feed Frame Unit Assembly - Epson TM-U200 series Technical Manual

C o n fid e n tia l

Sub-assembly A

Paper feed frame unit assembly

1. Apply G-31 to the middle of the paper hold roller shaft.
2. Pass the paper hold roller shaft through the paper hold plate spring and paper hold roller.
3. Hold the paper feed roller assembly at the angle shown in the illustration and insert the thin
end of the shaft into the paper feed frame assembly. Then move the roller assembly into
place.
5-8 Disassembly, Assembly, and Adjustment
Paper hold roller shaft
Apply G-31
Paper hold roller
Paper feed roller assembly
Paper hold
plate spring
Paper feed frame assembly
Thin
portion
Rev. A