Front Video Adapter; Flexiblelom Option - HP ProLiant DL160 Gen8 Maintenance And Service Manual

Front video adapter

Remove the component as indicated.
CAUTION:
connector.
To replace the component, reverse the removal procedure.

FlexibleLOM option

WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
Power down the server (on page 27).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove any attached network cables.
3.
Do one of the following:
4.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 28).
o
Remove the access panel
5.
Remove the processor air baffle
6.
Remove the PCI riser cage
7.
Loosen the thumbscrew on the FlexibleLOM.
8.
Be sure to connect the video adapter to the video connector, and not to the USB
To reduce the risk of personal injury, electric shock, or damage to the equipment,
("Access panel" on page 29).
("Processor air
("PCI riser cage" on page 45).
baffle" on page 30).
Removal and replacement procedures 44