Jumpers -Password And Chassis Id; Led Indicators; Front Panel Led Indicators - HP ProLiant DL170h G6 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL170h G6:
Table of Contents

Advertisement

Item
Designator
12
J38
13
J10~J17
14
XU1
15
J36
16
J42
17
J1~J8
18
XU2
19
J45
20
J24
21
J57
CAUTION: The TPM is not a customer-removable part.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact
an HP authorized service provider for a replacement system board and TPM board.
Jumpers –Password and Chassis ID
Password (J50) and chassis ID (J45) jumpers.
System configuration switch settings
Table 7
Jumper
J50
J45

LED Indicators

This section contains illustration and descriptions of internal and external status LED indicators located
on the:
Front panel
Rear panel
These LED indicators aid in problem diagnosis by indicating the status of system components and
operations of the server.

Front panel LED indicators

The front panel LED indicators allow constant monitoring of basic system functions while the server is
operating.
All manuals and user guides at all-guides.com
Description
USB 2.0 Port
FB-DIMM Slots
Processor 2 Socket
Power Connector
RPS Connector
FB-DIMM Slots
Processor 1 Socket
Protected RTC Jumper
Riser Connector
TPM Connector
Table 7
Status
1-2, password Reset
1-2, default setting, 2-3 Clear CMOS
describes the jumper settings.
Connectors, Switches, and LEDs 65

Advertisement

Table of Contents
loading

Table of Contents