Points To Be Checked Before Packing The Printer - Epson L565 Service Manual

L565/L566 Series

5.2 Points to be checked before packing the printer

To avoid the trouble, such as ink leaks. Products need to be packed following to the procedure mentioned below.
"Highland" means that applied to the customer who is in the place where the altitude
difference with service center is over 1, 000m asl .
In case of the customer who is in less than 1000m asl , "Lowland" is applied.
In the case of Ventilation Film less Ink Tank
1 Amount of ink in Ink Tank
2 Porous Pad
Attach Porous Pad on the Ventilation hole.(In the case of Ventilation Film less Ink Tank).
Size of Porous Pad is as follows
Important points when attaching the Porous Pad
1. Attach the Porous Pad on the Ventilation hole as fig1.
2. The height positions of Porous Pad is almost the same as the air chamber in Ink Tank as fig2.
If the Porous Pad is attached more up remarkly than the air chamber , there is the risk that the tube becomes
kink because the Porous Pad pushes the curved part of the tube as fig4.
3. Attach the Porous Pad noting that Porous Pad covers all Ventilation holes of Ink Tank as fig3.
fig2 fig1
Appendix
Item Highland
Full
Attach
Figure 5-2. Attaching the Item
Size of Porous Pad : H 35mm×W 120mm×D 8mm
Points to be checked before packing the printer
Lowland
Not Full
Not Attach
Tank
Pad
Air Chamber
fig2
Note
Full;Fill ink up to upper limit line
Not Full;An original amount of ink is kept
Attach on the Ventilation hole
Porous Pad
Pad
fig3
Revision A
Ventilation
hole
79
Confidential