Table of Contents
Advertisement
Product Installation
Removing the Packing Materials
Packing materials are affixed for protection against shock during transportation. Remove the packing materials
shown below before installing the product.
Installation
Provide sufficient space in a location appropriate for installation.
Location Appropriate for Installation
• On an area larger than the bottom surface of the product
• In a level and stable location
• In a location free of vibration and impacts
• In a location where a dedicated power outlet is available
• In a location with sufficient space around the product to allow for replacement of consumable products, and
daily cleaning.
• In a location meeting the guaranteed environmental conditions
B
A
The packing materials and packaging box are required for future transportation. Keep them in a
safe place.
• When moving the product, lift it up by grasping at the depressions on either side.
• Make sure that cords or other objects are not being pinched by the product.
• To avoid deterioration of the MICR recognition rate, do not install the product near a magnetic
field. In particular, check the MICR reader recognition rate when the product is installed near a
display device.
C
D
E
F
("Overall Dimensions" on page
("Environmental Specifications" on page
Chapter 2 Setup
115)
113)
35
Advertisement
Table of Contents
