Computer Setup; Computer Setup Utilities (F10; Appendix B - Compaq Deskpro ap230 Hardware Reference Manual

Computer Setup Utilities (F10)

appendix B

C
OMPUTER
Use Computer Setup to do the following:
Change factory default settings.


Set the system date and time.


Set, view, change, or verify the system configuration, including


settings for processor, graphics, memory, audio, storage,
communications, and input devices.
Modify the boot order of bootable devices such as hard drives,


diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120
drives.
Configure Quiet Drive options (for drives that support this feature).


Enable Quick Boot, which is faster than Full Boot but does not run


all of the diagnostic tests run during a Full Boot. You can set your
system to:
always Quick Boot (default);
 
periodically Full Boot (from every 1 to 30 days); or
 
always Full Boot.
 
Enable or disable Network Server Mode, which allows the


computer to boot the operating system when the power-on
password is enabled, with or without a keyboard or mouse attached.
When attached to the system, the keyboard and mouse remain
locked until the power-on password is entered.
Select Post Messages Enabled or Disabled to change the display


status of Power-On Self-Test (POST) messages. Post Messages
Disabled suppresses most POST messages, such as memory count,
product name, and other non-error text messages. If a POST error
occurs, the error is displayed regardless of the mode selected. To
manually switch to Post Messages Enabled during POST, press any
key (except F10 or F12).
Establish an Ownership Tag, the text of which is displayed each


time the system is turned on or restarted.
S
ETUP
Hardware Reference Guide B-1