Compaq Deskpro ap230 Hardware Reference Manual page 27

2-20 Hardware Upgrades
4. Connect the drive power
CD-ROM, DVD-ROM, or PD-CD drive and if analog audio is
preferred to digital audio, connect the audio cable
end of the audio cable
audio connector on the system board.
Connecting the Drive Cables
5. Remove the appropriate bezel blank from the subpanel inside the
front bezel. Refer to the section "Removing Bezel Blanks" for
more information.
6. Replace the computer access panel.
7. Reconfigure the computer, if necessary. Refer to Chapter 1,
"Installation Guidelines," for more information.
and signal cables and, if it is a


should be connected to the embedded

. The other