Compaq Deskpro ap230 Hardware Reference Manual page 20

1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock and disable the Smart Cover Sensor.
2. Shut down the operating system properly, then turn off the
computer and any external devices, then disconnect the power cord
from the power outlet.
3. Remove the access panel and locate the memory module sockets.
WARNING: To reduce risk of personal injury from hot surfaces, allow
!
the internal system components to cool before touching.
4. Open both latches of the memory module socket
memory module into the socket
Begin by installing a module into the socket nearest the preinstalled
module, and install the modules following the numerical order of
the sockets.
A memory module can be installed in only one way. Match the
notch on the module with the tab on the memory socket. Push the
module down into the socket, ensuring that the module is fully
inserted and properly seated
Installing a DIMM
, and insert the


.

.

Hardware Reference Guide 2-13