Compaq Deskpro ap230 Hardware Reference Manual page 42

Computer Setup
Continued
Heading Option
Security Setup Password
Power-On Password
Password Options
Smart Cover
Support for Computer Setup options may vary depending on your specific hardware configuration.
Description
Allows you to set and enable setup (administrator)
password.
Note: If the setup password is set, it is required to
change Computer Setup options, flash the ROM, and
make changes to certain plug and play settings
under Windows. Also, this password must be set in
order to use some Compaq remote security tools.
See the Troubleshooting Guide for more information.
Allows you to set and enable power-on password.
See the Troubleshooting Guide for more information.
Allows you to
enable/disable network server mode.
Note: This selection will appear only if a power-
on password is set.
specify whether password is required for warm
boot (CTRL+ALT+DEL).
Note: This selection is available only when
Network Server Mode is disabled.
See the Desktop Management Guide for more
information.
Allows you to
enable/disable the Smart Cover Lock
enable/disable Smart Cover Sensor.
Notify User alerts the user that the sensor has
detected that the cover has been removed.
Setup Password requires that the setup
password be entered to boot the computer if the
sensor detects that the cover has been
removed.
Feature supported on select models only. See the
Desktop Management Guide for more information.
Continued
Hardware Reference Guide B-9