Compaq Deskpro ap230 Hardware Reference Manual page 35

B-2 Computer Setup
Enter the Asset Tag or property identification number assigned by


your company to this computer.
Enable power-on password prompting during system restarts


(warm boots) as well as during power-on.
Establish a setup password that controls access to Computer Setup


(F10) and the settings described in this section.
To secure integrated I/O functionality, including the serial, USB, or


parallel ports, audio, or embedded NIC, so that they cannot be used
until they are unsecured.
Enable or disable Master Boot Record (MBR) Security.


Enable or disable removable media boot ability.


Enable or disable removable media write ability.


Solve system configuration errors detected but not automatically


fixed during the Power-On Self-Test (POST).
Replicate your system setup by saving system configuration


information on diskette and restoring it on one or more computers.
Execute self-tests on a specified IDE hard drive.


Configure various energy-saving features including energy saver


mode, system and hard drive timeouts, power button mode, and
power LED behavior.