Compaq Deskpro ap230 Hardware Reference Manual page 38

Computer Setup
Continued
Heading Option
Storage Device Configuration
Support for Computer Setup options may vary depending on your specific hardware configuration.
Description
Lists all installed storage devices. The following
options appear when a device is selected:
Diskette Type (For legacy diskette drives only )
Identifies the highest capacity media type accepted
by the diskette drive. Options are 3.5" 1.44 MB, 3.5"
720 KB, 5.25" 1.2 MB, 5.25" 360 KB, and Not
Installed.
Drive Emulation (IDE devices only)
Allows you to select a drive emulation type for a
storage device. (For example, a Zip drive can be
made bootable by selecting disk emulation.)
Drive Type Emulation Options
Hard disk No emulation options available.
Diskette None (treated as diskette drive)
Disk (treated as hard drive)
CD-ROM None (treated as CD-ROM drive)
Diskette (treated as diskette drive)
Disk (treated as hard drive)
Other (e.g., Zip None (treated as Other)
drive)
CD-ROM (treated as CD-ROM drive)
Diskette (treated as diskette drive)
Disk (treated as hard drive)
Transfer Mode (IDE devices only)
Specifies the active data transfer mode. Options
(subject to device capabilities) are PIO 0, Max PIO,
Enhanced DMA, Ultra DMA 0, and Max UDMA.
Continued
Hardware Reference Guide B-5