Removing The Air Baffle - IBM x3655 - System - 7985 User Manual

Removing the air baffle

When you work with some optional devices, you must first remove the air baffle to
access certain components or connectors on the system board. The following
illustration shows how to remove the air baffle.
Attention:
the server. Operating the server with an air baffle removed might damage server
components.
To remove the air baffle, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Grasp the release tabs on each side of the air baffle, and lift the air baffle out of
Release tab
Air baffle
For proper cooling and airflow, replace the air baffle before you turn on
on page 23.
external cables (see "Turning off the server" on page 13; then, remove the cover
(see "Removing the cover" on page 26).
the server.
Riser card assembly
Chapter 2. Installing optional devices
Release tab
29