System-Board Leds; Installation Guidelines - IBM x3655 - System - 7985 User Manual

System-board LEDs

The following illustration shows the light-emitting diodes (LEDs) on the system
board.
Microprocessor 1
error LED

Installation guidelines

Before you install optional devices, read the following information:
v Read the safety information that begins on page v and the guidelines in
v When you install your new server, take the opportunity to download and apply
v Before you install optional hardware devices, make sure that the server is
PCI slot 2
error LED
PCI slot 3
error LED
PCI slot 4
error LED
Riser-card
error LED
"Handling static-sensitive devices" on page 25. This information will help you
work safely.
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum levels
of performance. To download firmware updates for your server, go to
http://www.ibm.com/servers/eserver/support/xseries/indes.html, select System
x3655 from the Hardware list, click Go, and click the Downloads tab. For
additional information about tools for updating, managing, and deploying
firmware, see the System x and xSeries Tools Center at http://
publib.boulder.ibm.com/infocenter/toolsctr/v1r0/index.jsp.
working correctly. Start the server, and make sure that the operating system
System board
error LED
Microprocessor 2
error LED
Battery error LED
DIMM 9 error LED
DIMM 16 error LED
RAID Error LED
DIMM 1 error LED
DIMM 2 error LED
DIMM 3 error LED
DIMM 4 error LED
DIMM 5 error LED
DIMM 6 error LED
DIMM 7 error LED
DIMM 8 error LED
Chapter 2. Installing optional devices
23