Completing The Setup - IBM x3655 - System - 7985 User Manual

1. Go to http://www.ibm.com/servers/eserver/support/xseries/index.html.
2. From the Hardware list, select System x3655 and click Go.
3. Click the Download tab.
4. Select the system service package for the operating system that is running on
5. Click the file link to download the system service package to d:\ibmssp, where d
6. Extract the files into d:\ibmssp. See the readme.txt file, which is included with
7. Follow the instructions in Remote Supervisor Adapter II Installation Instructions,
8. Restart the server after the software and firmware are installed.

Completing the setup

See the IBM Remote Supervisor Adapter II User's Guide on the IBM System x
Documentation CD for instructions for completing the configuration, including the
following procedures:
v Configuring the Ethernet ports
v Defining login IDs and passwords
v Selecting the events that will receive alert notifications
v Monitoring remote server status using the Remote Supervisor Adapter II SlimLine
v Controlling the server remotely
v Attaching a remote diskette drive, CD drive, or disk image to the server
After you configure the adapter, use the Web-based interface to create a backup
copy of the configuration so that you can restore the configuration, if you have to
replace the adapter. For more information, see the Remote Supervisor Adapter II
User's Guide.
the server in which the Remote Supervisor Adapter II SlimLine is installed.
is the hard disk drive letter. (Create the directory if necessary.)
the extracted files, for a list of the files in the package.
which is in Portable Document Format (PDF) in d:\ibmssp, to install the software
and firmware.
Web-based interface
Chapter 3. Configuring the server
91