Replacing The Media Card Reader - Dell ALIENWARE AURORA - GAMING MACHINE - ALIENWARE AURORA Service Manual

Replacing the Media Card Reader

1. Follow the instructions in "Before You Begin" on page
2. Remove the new Media Card Reader from its packaging. Save the original
packaging for storing or shipping the Media Card Reader.
3. Slide the Media Card Reader into the FlexBay dock.
4. Replace the four screws that secure the Media Card Reader to the FlexBay
dock.
5. Lift the securing tab and slide the FlexBay dock through the front of the
computer until the securing tab snaps into place.
6. Connect the FlexBay USB cable to the connector on the master I/O board.
7. Close the PCI shroud (see "Closing the PCI Shroud" on page
8. Replace the left side-panel (see "Replacing the Left Side-Panel" on page
9. Lift the drive panel towards the top of your computer.
10. Connect your computer and devices to electrical outlets and then turn
them on.
6.
18).
11).
CHAPTER 5: DRIVE(S)
029
/
029